No photos, but some info; I built a wheel carrier onto one of the ubiquitous ARB rear bars, unfortunately sold it when I was between Rangies.
I welded a trailer stub axle upright into each end of the bar by cutting an appropriate size hole in the horizontal surface and some beefy reinforcing underneath, used a stock trailer hub welded into the carrier arm as the hinge. I figured that if the chassis mounting for this bar was strong enough to tow a 4500kg trailer, it could carry a wheel and tyre. My plan was to have a wheel carrier on one side and a couple of jerry cans on the other side, never got around to doing the jerry can carrier but had the spare wheel mount with a chainsaw bracket plus shovel holder.
Bookmarks