Quote:
Originally Posted by Lotz-A-Landies
John you hear that quite a bit, however I have not found it in any of the publications from the RTA or DOTARS ( Like VSB 01 Building Small Trailers ).
If someone were to suggest that only solid axles are permissible, then ask them about "Duratorque" suspensions which only have stub axles or the axles on semi-trailers which are welded square section.
Diana |
Yes, I can't find anything written either. My present plan is to cut a few inches off each end of an axle housing and turn them down to fit a suitable piece of steam pipe - automatically taking care of the problem of making sure the flange is on straight and fits the stub axle.
John