try a few of these
1. switch the system on with the engine not running. Wiggle/remove the relays and plugs in the compartment under the pax seat to determine which relay turns each bit on and off.
2. buy some electrical cleaner and clean all the plugs and sockets for verdigrease.
3. check you have power to the fan clutch when the system turns on and off using the temp switch
4. check all the fuses in the various locations in pax compartment and batterybay. Use a multimeter don't just look at them. spray all fuses with contact cleaner when re assembling.
5. if you do manage to get it goint check the sight glasses on the receiver dryer for bubbles.
if all else fails talk to the guys in redcliffe.
![]()


Reply With Quote



Bookmarks