Thread: RRC Rear Bar and Wheelcarrier Wanted

Hey Guys,

Still building up my rangie and just wondering if any one has had a good rear bar made up for a rangie or knows of anyone that i can buy one from.

I have an 89 model with a 2.5 inch body lift, and it also needs to have the ability to hold a 33inch tyre

what are my options,i'm based in sydney

cheers in advance

depends how good you at modifying....

Here was my Rangie with an ARB bar I purchased from the wreckers...I cut it up to suit a 2" body lift and then trimmed the corners to aid departure angle. I also trimmed the rear lower quarter panels and added RHS (braced back to the chassis) to the bar to protect the cut panels. Rear wheel carrier is from LRA and I modded it to suit the cut bar, then added a reversing/work light, shovel and axe holder. The wheel carrier is designed to carry any sized rim/tyre combination.

Cutting and welding the bar to suit a 2" or 2.5" body lift is not that difficult. There is any easy way to do it withough comprimising the strength of the towing capacity.

Cheers
Andrew