Thread: Why don't Safari make a snorkel for the 4L V6 Petrol?

What's the difference between the Petrol V6 and the V8? Anyone have any pictures?

I tried calling Safari again but this time not letting on so quickly that I was a customer looking to buy a snorkel.

Thankfully, I got someone who was very helpful who confirmed that the V6 Petrol never came up as an engine for Safari to sell a snorkel for.

So there is no known technical reason from Safari's point of view. Given that the 4L isn't sold any more its unlikely that we will get a snorkel however.

I then called ARB to see if they had installed the 2.7L snorkel on a 4L but while the guy was really helpful he was unaware of anyone at ARB who had done so.

So - I'm going to take a chance and buy the 2.7 snorkel and see how it goes on the mighty 4L V6 Petrol.

If by chance the snorkel can't provide enough air flow then I'll make up a way to disconnect the snorkel easily for normal driving and only connect when needed.

IIRC, it is just a 80mm hose fitted from body of Safari snorkel to the elbow on the air box. I reckon it is a safe bet that the TDV6 one will fit.

Originally Posted by djhampson

I called them and they said they would do it but they wouldn't be able to quote on the fitting cost because they didn't know how long it might take them. The snorkel itself was $500 - 600.

Interesting that they won't quote on something that they've apparently done before..... That's a shame.

I have a contact at ARB on another forum I'm on, so I'll see if he can suss this out for us, too..

Two blokes, a TDV6 snorkel, half a day & 2 x 6 packs of your choice after lunch with 2 shop burgers & chips. Save the fitting cost and the awwwww ummmm weeeelllll we might be able to fit it by some bloke on the phone who couldn't give a F.

Originally Posted by Robocop

Two blokes, a TDV6 snorkel, half a day & 2 x 6 packs of your choice after lunch with 2 shop burgers & chips. Save the fitting cost and the awwwww ummmm weeeelllll we might be able to fit it by some bloke on the phone who couldn't give a F.

Yeah, it might come to that, yet... It would be nice to find someone who'd done it before, though. Id rather my car not be the guinea pig...

The air intake is the same on the drivers side is it not? The most fiddle will be maybe a few trips to the exhaust shop for some custom pipe work if needed.

No need for fabrication - 80mm plastic pipes are available from Autobarn and others. 2 jubilee clamps to both ends and job's done. I don't understand all the dramas.