|
|||||||
| Freelander_1 Chat specifically relating to Freelander (series 1) |
 |
|
|
Thread Tools | Display Modes |
13th January 2010, 02:06 PM
|
|||
|
|||
|
Ok, no pics for now, but a quick update to save Ausfree's fingernails
 Not long after the last update, it was decided due to time issues (ie. I don't have enough  ) to get the last bits done by the pros...First it went to the exhaust shop where a 2.5" dump-pipe back exhaust & mild steel intake plumbing were fitted...this took 2 months, but I can't complain too loudly as he only charged $650 for the lot  There was no room for the HSV muffler I'd picked up, so it is running the straight through muffler off my old laser (I wrote the car off shortly after fitting it) with an almost new HSV cat converter...It came back just before christmas, but due to work commitments & garage holidays it only went in to have the cooling, pwr steering ect hooked up on Monday, apparently it will be back by the end of the week then it's off to the 'Lecys to get the wiring sorted...Almost there Will try not to leave you hanging for so long next time promise I'll get some pics before it leaves for the Electricians 
|
| The Following User Says Thank You to JesusFreak For This Useful Post: | ||
HBWC (15th January 2010) | ||
|
13th January 2010, 07:07 PM
|
||||
|
||||
|
Thanks for that Jesusfreak, as a fellow Freelander owner, I am really keen on seeing photo's, shame you live so far away, would like to see the vehicle.
|
|
30th January 2010, 10:47 PM
|
||||
|
||||
|
mister jesus freek sir do you have any updates
__________________
thanks Jono  Skip 1995 D1 disco tdi auto Tin Worm the lickerish al-sort scat tojo diffs 42" iroks Modern Times 87 falcon van soon to have au xr6 motor and boost
|
|
8th February 2010, 08:04 PM
|
||||
|
||||
|
wow I never venture into the freelander section unless the pages get above 1 then it must be interesting
 Great project really enjoyed reading your thread....keep the updates coming
__________________
Our Land Rover does not leak oil! it just marks its territory....... 
|
|
8th February 2010, 08:17 PM
|
||||
|
||||
|
Quote:
|
|
23rd February 2010, 01:36 AM
|
||||
|
||||
|
any chance of a update
__________________
thanks Jono Skip 1995 D1 disco tdi auto Tin Worm the lickerish al-sort scat tojo diffs 42" iroks Modern Times 87 falcon van soon to have au xr6 motor and boost
|
|
13th March 2010, 04:50 PM
|
|||
|
|||
|
Thanks for the continued interest guys
Due back from the mechanics next week, a few small issues encountered, but everything that's unexpected adds to the time...1. Had lost part of the clutch hydraulics while everything was stripped down...DOH! Had to order replacement kit... 2. Custom stainless piping for PS & Cooling needed to be bent, expected this one, but took a while... 3. Freeby doesn't run a fuel return line from it's regulator, mazda does...had to order new fuel line, run it alongside the factory line & tap it in above the sender... 4.Mechanic was sick for a couple of weeks... Almost there now though
|
| The Following 7 Users Say Thank You to JesusFreak For This Useful Post: | ||
Ausfree (13th March 2010), BigJon (13th March 2010), camel_landy (14th March 2010), djhampson (13th March 2010), HBWC (13th March 2010), inside (13th March 2010), mike 90 RR (13th March 2010) | ||
|
24th March 2010, 09:15 PM
|
||||
|
||||
|
update???? please is it back from the mechanics
__________________
thanks Jono Skip 1995 D1 disco tdi auto Tin Worm the lickerish al-sort scat tojo diffs 42" iroks Modern Times 87 falcon van soon to have au xr6 motor and boost
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
