Thread: Springs For Stage One WORN OUT.

Originally Posted by Chad

Im after a set (front and Rear) of Leaf Springs to suit a Stage Series 3 109 ute.

I need them to be worn out, and the FLATTER the better...

Its for my Rat Rod project, I thought these would work, turned over, as the vehicle had Not done much work, but is WAY too low to even get the diff etc in.

If I can't find some worn out ones I will just get them RESET, but as they are fairly INTESIVE job its almost as much as NEW suspension to do it.

$200 per spring, being a total of $800...

I would rather just find some older flatter ones , and keep these in case I want to put them back in at a later date.

If anyone has any lying around, please drop me an email.

Probably not the sort of thing asked for much...

I have removed the standard BUMP Stops, and looking for as little clearance as possible, just enough to have suspension travel.

Chad

Maybe ask someone else. I paid $60-80 a PAIR (ex GST) to have my springs reset. That was by Bayside springs and blacksmithing in Brisbane.

You could also try taking the packs apart and flattening the leaves using some heat from an oxy.

OR - you could get some hilux front springs, and just extend the dumb irons so they fit.

Btw - springs from any SII/IIA/3 will fit your stage 1.

to quote Miss Bingle "Where the bloody hell are you"

hey mate

I should have said that...

Near Canberra, but happy to pickup within a couple of hours.

Thanks Chad

Shame.......I just disposed of a set.

Oh well

next time...

The thanks wasn't a sarcAstic " THANKS "

Prob not the MOST asked for items I wouldn't think...

Chad