Page 1 of 6 123 ... LastLast
Results 1 to 10 of 52

Thread: Series I Paddock find - Bought it on the spot

  1. #1
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0

    Series I Paddock find - Bought it on the spot

    I had an unexpected purchase yesterday! Even though I have been on the lookout for a nice Series IIA or III I came across a 1955 86" that had been sitting in a paddock out in the open for the last 5 years, and I couldn't say no to it.

    After a chat with the farmer (who was happy to dispose of it) we got some fuel and jumper leads and after 2 or 3 minutes of cranking and pumping on the accellerator it sprang to life, much to both our surprise. I took it for a small drive around the paddock and it went pretty well for a 50+ year old car that hadn't moved for 5 years.

    He only wanted $250 and even after I offered him twice that the still said $250, so no complaints about the price.

    It's got a PTO that still works but no shaft, and a hand throttle (why doesn't my 130 have one of these...?). He gave me a workshop manual and a bunch of small spare parts from when he rebuilt the engine. The canopy is ruined but I think I can get another from Exmoor Trim in the UK. The brakes are binding but I am hoping that is only an adjustment issue. The springs are pretty rusted so not sure if they'll need replacing or can be refurbished.

    I was pretty happy with all that, as you can imagine. Now I just have to clear some space in the shed to keep it out of the weather and start doing a few fix-up jobs.
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 1970
    Location
    Nanny state UK...
    Posts
    3,253
    Total Downloaded
    0
    Blimey... Top find!

    M

  3. #3
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    well done , i'd have bought it for that price too
    what a bargain
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR

  4. #4
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0

    Few more Photos

    A few more photos....
    Attached Images Attached Images

  5. #5
    Join Date
    Jan 1970
    Location
    Alstonville...is near Byron Bay
    Posts
    3,034
    Total Downloaded
    0
    Well done!

    GQ

  6. #6
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    Great looking '54-'55 86" - the horn button and dip switch is worth as much on ebay as you paid for the whole vehicle.

    You can't kill those little engines with a stick! May leak oil and be smoky but they still run.

    Good Work

    Diana

    Addit: the vacuum advance is missing and the distributor is way out - I would be checking the timing.

    P.S. that car had a governor at some stage - did it come with the other bits in the car?
    Last edited by Lotz-A-Landies; 5th November 2007 at 09:16 AM.

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.

  7. #7
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0
    Is the dip switch the thing next to the horn button?

    Also, what is the galvanised "sliding" control pictured behind the gear lever (the one that slides left and right)? I thought it was going to be the hand throttle, but that is the lever to the right that pulls in and out.

  8. #8
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0
    Tell what a govenor looks like, and what it is used for.....

  9. #9
    Join Date
    Jan 1970
    Location
    Jimboomba, QLD
    Posts
    1,293
    Total Downloaded
    0
    What a fantastic find and it's a runner! - well done!

    And the price!!
    -- Paul --


    | '99 Discovery Td5 5spd man with a td5inside remap | doesn't know what it is in for ...
    | '94 Discovery Tdi 5spd man | going ... GONE

  10. #10
    Roverray Guest
    Good one Spudboy
    the governer keeps the engine at a set revs under load changes to run the pto driven equipment.
    The lever might be to engage pto equipment??

Page 1 of 6 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!