HI JC!!!!

Its 3pm over your way Matt - head should be off by now???

Hope to get mine going again this weekend (apart from the exhaust).

Yea, been off for a while, had to put the 120" back together aswell and give it to my brother, here's what I found





Do you think its been leaking?

Will get another head gasket next week and stick it back together, the head asket has a sealant on it, obviuosly stuffed now, anyone had any luck with spray on hilomar?

__________________
"There is a good idea in the bottom of every bottle"....Jack Daniels

Glad that's all it is. Make sure you get the genuine ISUZU gasket.

I always use VHT copper gasket cement. Cheaper than Hylomar, and hasn't let me down yet.

Looks like it wasn't even torqued down properly?

SROOTED!

hmm is the head flat?? the way the soot seems to have migrated so far from the bores is a bit weird (if it's flat).

Mmmmm, questions, its flat, the straight edge tells me so, I can neh give ye an answer

__________________
"There is a good idea in the bottom of every bottle"....Jack Daniels

I was only thinking about useing, Hylomar, so I can use the old/new head gasket, but I'll give it a miss and get a new one with sealant on it

__________________
"There is a good idea in the bottom of every bottle"....Jack Daniels

Copper Gasket I hope the rest of the engine is torqued down better then the head was.

__________________
:Strange Rovers Down Under 4BD1T 120" 110 /3 Rangies:/ 3 series 1's/ 2 series 2's/2 series 3 88's/2
series 3 109's and a heap of rice burners

Shhhhhhhhhh

__________________
"There is a good idea in the bottom of every bottle"....Jack Daniels