Page 9 of 23 FirstFirst ... 789101119 ... LastLast
Results 81 to 90 of 227

Thread: New Jack option.

  1. #81
    Join Date
    Mar 2015
    Location
    Mona Vale, NSW
    Posts
    179
    Total Downloaded
    0
    Quote Originally Posted by Jcrowe69 View Post
    The factory issue stuff is totally inappropriate, I guess most owners will call NRMA
    Exactly what my wife did. I would assume LR Assist would also be an option, although is probably NRMA anyway.
    MY23 D300 SE Silicon Silver
    2014 MY15 D4 3.0 SDV6 HSE (Sold)
    Complete Campsites Exodus 14 Camper Trailer
    2015 Triumph Tiger XRT

  2. #82
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,273
    Total Downloaded
    0
    Quote Originally Posted by laughto View Post
    Exactly what my wife did. I would assume LR Assist would also be an option, although is probably NRMA anyway.
    I had a flat and rang LR assist - bad back That said, if I was away from an urban area I would probably do it myself to save time and just put up with the consequences

    The guy wasn't from NRMA. Can't remember the name on the side of his car but it wasn't specifically LR assist.

    Martin

  3. #83
    Tombie Guest
    This is the consequences of the factory jack.. (when it buckles and drops the vehicle onto the rim)





  4. #84
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    Resurrecting this older thread.
    What was the final outcome of the "Jack" situation?



    Hmmm, not sure how that worked,, I was missing quite a few posts,,,

  5. #85
    Tombie Guest

    New Jack option.

    I purchased a 2 stage from Blackwoods and carry that...

    It took 2 trolley Jacks, a Digger and his minion and the Defender jack to sort mine out.

  6. #86
    Join Date
    Oct 2013
    Location
    Old Toongabbie, Sydney NSW
    Posts
    1,273
    Total Downloaded
    0
    Quote Originally Posted by Chops View Post
    Resurrecting this older thread.
    What was the final outcome of the "Jack" situation?



    Hmmm, not sure how that worked,, I was missing quite a few posts,,,
    For completeness, here's the other thread.

    http://www.aulro.com/afvb/l319-disco...ion-sorts.html


    Martin

  7. #87
    Join Date
    Aug 2015
    Location
    Perth
    Posts
    1,215
    Total Downloaded
    0
    This one looks like it should work then.. Although it may end up being 10mm too high i'm thinking i'll keep the LR scissor in the car too in case i need to get it started with that... $125



    https://www.blackwoods.com.au/part/0...n-line-hyd-10t

  8. #88
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Russrobe View Post
    This one looks like it should work then.. Although it may end up being 10mm too high i'm thinking i'll keep the LR scissor in the car too in case i need to get it started with that... $125
    https://www.blackwoods.com.au/part/0...n-line-hyd-10t
    That one is pretty huge Russ and the 2t version actually has better extension anyway.
    Refer earlier in this thread ..... 2t version:
    https://www.blackwoods.com.au/part/0...escopic-hyd-2t

    Comparison:
    Capacity (kg) 2000 > 10000
    Height Max (mm) 418 > 473
    Height Min (mm) 181 > 240
    Stroke (mm) 201 > 153
    Mass (kg) 5.7 > 8.1

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  9. #89
    Join Date
    Aug 2015
    Location
    Perth
    Posts
    1,215
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    That one is pretty huge Russ and the 2t version actually has better extension anyway.
    Refer earlier in this thread ..... 2t version:
    https://www.blackwoods.com.au/part/0...escopic-hyd-2t

    Comparison:
    Capacity (kg) 2000 > 10000
    Height Max (mm) 418 > 473
    Height Min (mm) 181 > 240
    Stroke (mm) 201 > 153
    Mass (kg) 5.7 > 8.1

    Cheers,
    Scott
    Ah crap i already ordered. Will try swap. Thanks Scott

  10. #90
    Join Date
    Aug 2016
    Location
    Melbourne
    Posts
    282
    Total Downloaded
    0
    I'm slowly getting my D4 ready for an outback trip - hopefully next year. A few people have told me they have moved away from high lift jacks, as there heavy and dangerous - with most turning to exhaust jacks.


    Question is, can you use an exhaust jack for a simple wheel change ( say flat tyre ) on a bitumen or dirt road ? Are they relatively easy to use ?


    Any comments or feedback on exhaust jacks and their limitations appreciated !

Page 9 of 23 FirstFirst ... 789101119 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!