I have some of this stuff I have used before for the same thing. Works well if the preperation is done correctly.

http://www.ppc.au.com/coating_motorcycle.htm[/URL]

Dont know how to post the link properly?

Plans, what are they? PPPPPPP doesn't work for me. Here's a couple more photo's of mounts that may help if you want to DIY. I have removed or cut some of the original body support bracket on the chassis, but all of these can be returned to standard if I ever take the sliders off.


Middle mount on drivers side. I have used angle this side because of the auxilliary tank mount and it's a bit of an over kill on bolts, but it wont fall off. Passenger side I used 75 x 50 RHS and bolted both side.


The rear mount is angled slightly down to clear the body and a gap is visible to allow the mount to drain.

Front mount uses the standard body mount bolt with plates both sides of the chassis and 2 bolts in each plate each side of the chassis.