Hi all , does anyone know exactly the distace between the centre of the hood stick hole and the next hoodstick hole forward on a LWB series 2a.

i.e the distance between those two points for a 3/4 tilt , centre to centre and back to forward ?

cheers

__________________
Kind regards

J.

REMLR N° 221
1969 IIa G.S.

For a 3/4 tilt you will have two bows close together at the front. First one is the rear of the cab canvas and the second one is the first one of the rear tilt. Are these the ones you want the measurments between

__________________
RobHay

1964 Series IIA 109 Military Fire Tender (Sort of)
Sankey Trailer.
1968 Series IIA 109 GS.

In this job you have to be able to either run very fast or fight very well.......I am too fat to run!

thats the ones, from the very back of the tub hole to the next hole.

But imagine the hole that the last hoop fits into and the hole that where the second last hoop goes into, an imaginary line between theese two hoop holes from the centre of the hole to the other centre of the hole.

I was hoping a manual would give this measurement exactly somewhere

hope that is not too confusing.

__________________
Kind regards

J.

REMLR N° 221
1969 IIa G.S.

20cm

John

__________________
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol

sorry guys, guess I aint to good at explaining.

I meant the other 2 holes.

looks like it is exactly 6 feet centre to centre, I have been advised.


(then 20 cm to the next one,) thanks John

__________________
Kind regards

J.

REMLR N° 221
1969 IIa G.S.