Have dropped the price, need to sell before the wife has the baby!

Hi guys.

I need the front section of the sill panels, from Series 3.

Just FORWARD from inline, where the Firewall Finishes, to the Front Guard. About 300mm each side.

Cut the old Sill for a Modification, and it has a lift of front, so now need those sections, both sides. It will attach under the front Guards.

Im located near Canberra, but can pickup Sydney, South Coast or along the way.

Thanks Chad 0423 826 939

Just updating that i didn't get any interest in the whole so i am breaking up the s3 wagon and started putting bits on ebay - I really need to make the major stuff 'disappear' as quickly as possible to remain popular at home. Stuff that i wont use will go up for 99c bids and hopefully find homes for as much of that as possible. Might ask a bit more where I can possibly use things in the future (eg. front doors, guards) but rear wagon stuff will go up probably this weekend. Holden motor is up there now but have had a couple of people interested in the conversion stuff so held back on putting that with it but still offered it if someone wanted to bolt it all straight in - have driven the car now and it is a very good motor and runs really nicely (even wondered if I am doing the right thing sticking with the 2.6!) - will work all that out tomorrow when auction ends though. A well made bull bar, early discovery wheels with reasonable tyres and the jap bucket seats that were in it are all up there for 99c right now and will end Sunday. So call if you are after bits specifically but otherwise you might be interested in cheap bits that will come up on ebay. Best bit about ebay is i dont have to think about a price!

Down to the last bits for the S3 wagon before it goes to the scrap yard. Have put bits in the for sale ads here to give away but there is a chassis, bonnet with 2 holes and scoops on them and some japanese bucket seats up for grabs. I can dispose of these and get money for the scrap but seems a shame so hence why offered for free to the 'save landrovers' appeal! But i am back at work and have little time and need to move these quick (promised i would get rid of while i was on leave). The chassis is on my car trailer and if you are not too far away i will even deliver. Things are already crazy at work so easiest if you just call Craig on 0421910935. Have had a request for photos of the chassis, but something not easy to capture in useful detail so please be specific if you want photos of any areas that commonly rust. But obviously i would prefer it if you took your time to come and have a look, particularly given the price. My apologies if that sounds a little abrupt but anyone who has tried to sell a range of bits and dealt with requests associated with that will understand why i don't want to invest too much more time and just happy to give these away.

http://www.aulro.com/apc/showproduct.php?product=6815

G'day All,
I have a station wgon rear door for sale, it has no damage to the skin or frame or glass (the frames usually crack/split), it has minor surface rust along the bottom edge of the frame, missing only the trim, $50.00 ono cheers Dennis
also has spare wheel carrier.

Hi everyone,

I've just put up for sale a Series 3 109 GS, suitable for restoration or parts:

http://www.aulro.com/apc/showproduct.php?product=6859

Location is Samford (Brisbane north west).

Thanks
James.

eBay Australia: Buy new & used fashion, electronics & home d