|
|||||||
| Series 3 Chat specifically relating to Series III leaf sprung land rovers and variations. |
 |
|
|
Thread Tools | Display Modes |
26th November 2008, 08:11 PM
|
||||
|
||||
|
Looking at the parts book, there is a piece of flat steel along the upper edge, twisted through a right angle on each end, and bent down at the inner end. I'm guessing the outer end is fastened to the bolt holding the front end of the skirt, and the inner end is bolted to the chassis, possibly one of the bolts holding the steering box support.
__________________
JDNSW 1986 110 County 3.9 diesel 1970 2a 109 2.25 petrol 
|
|
8th January 2010, 08:55 PM
|
||||
|
||||
|
That was my thought too but the bolts holding the steering box bracket are 5/16 and the holes in the flap bracket are 1/4. I was hoping that someone had a vehicle with them fitted who could shed some light.
|
|
5th March 2010, 10:03 PM
|
||||
|
||||
|
Some nice bloke posted these for me on the UK series 3 forum. I hope they might help someone else.
|
| The Following User Says Thank You to lro11 For This Useful Post: | ||
jimmy86 (4th May 2011) | ||
| Please support our Advertisers |
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
