just bent my front passenger side on my 110- didn't relise they cost so much
Take them all off(thats what I did in my series3)or spend a bit more and put rock sliders on
wreckers?
Brett
110 300tdi
Hi all
Been hunting for a driver's side rear sill panel suit my 130. Rang ULR in Melbourne and was quoted $370 plus GST!!!!
It's a piece of tin (pretty sure it is just pressed tin) about 1000mm long x 75mm wide with the sides bent up.....
That can't be right!
I might try a local sheet metal shop and get one made.
Just having a vent....
Cheers
Andrew
Andrew
1998 Landrover Defender 300Tdi 130 HCPU Expedition
1972 Peugeot 504 Sedan - Daily Driver
just bent my front passenger side on my 110- didn't relise they cost so much
Take them all off(thats what I did in my series3)or spend a bit more and put rock sliders on
wreckers?
Brett
110 300tdi
It might be worth contacting these guys and seeing if they're able to help...prices are a LOT more favourable than LR's.
repair panels and body mounts for all Landrovers, including Range Rover Classic, Defender, Series, Discovery
It is probably aluminium, but that does not make much difference. Car manufacturers charge high prices for parts, particularly body parts, because they can.
Reminds me of a conversation I heard quite a few years ago - only heard one side of the phone conversation "$120?" "I asked the price of a plastic hub cap not an alloy wheel!".
Bit that is what is was. Ford Laser, about 1988. Same thing though.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
There maybe someone out there who's fitted sliders and has their sill panels still intact ?
I have a set off a 110, but the passenger one is bent already.
'95 110 300TDI, F&R ARB Lockers, Twine Shower, Aux Sill Tank, Snorkel, Cargo barrier, 9 seats, swingaway wheel carrier, MadMan EMS2
'85 110 Isuzu NA 4BE1 3.6l Diesel, 0.996 LT-95, Rear Maxi (SOLD)
'76 SIII 109" Nissan ED33 5-SP Nissan GBox (SOLD)
I believe I still have a set of good 110 sills.
Or you could do what I did
Cost about $180 for both sides but the fella did an excellent job. The ends tuck in behind the plastic guards and he has folded it over so it protects the paintwork below the door
Sorry for the rushed photo
Powdercoated with this finish
Jock
Landroverless
some time ask your friendly local holden parts department for a quote on a replacement step/bumper for a LT rodeo/LTR colorado..... a tad over $4k.....
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks