Results 1 to 7 of 7

Thread: V8 ARP Stud Torque Numbers

  1. 28th January 2013, 05:49 PM #1
    Davo
    Davo is offline ChatterBox Silver Subscriber
    Join Date
    May 2007
    Location
    WA
    Posts
    2,595
    Total Downloaded
    0

    V8 ARP Stud Torque Numbers

    I've been doing my homework again and thought I'd post my list of what torque settings, (in ft lbs), different people have used.

    Head studs:
    - ARP Instructions: 80 + ARP lube
    - Real Steel: 65 + ARP lube
    - V8 Developments: 75
    - TR Spares: 65
    - PhilipA on this forum: three stages - 40-60-80
    - AULRO member quoting UK builder: 65-70
    - UK V8 forum: 65-70

    Mains:
    - ARP Instructions: 110 + ARP lube
    - Real Steel: 90 + ARP lube
    - AULRO member quoting UK builder: 65
    - RPi: 90
    - Des Hammill: 70-75 okay, 90 too much unless line boring
    - UK V8 forum: 80

    This should help anyone else who thought the ARP instructions sounded like too much! I'll probably go with 70 on the heads and 75 for the mains.

    A really important point is to tighten up in stages, and that the ARP lube has been proven as far more reliable for consistent torque than anything else. It seems to require lower torque as well, probably because it's so slippery.

    There is also some talk about backing off and re-torquing. This seems to depend on what your preference is, but it sounds like it's not a bad idea, at least where a head gasket is being squished.
    At any given point in time, somewhere in the world someone is working on a Land-Rover.
    Reply With Quote Reply With Quote
  2. 28th January 2013, 06:19 PM #2
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Handwritten note from TRS,,

    mind you this gasket only lasted 2 years.
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  3. 28th January 2013, 06:26 PM #3
    Hoges
    Hoges is offline YarnMaster Subscriber
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    3,233
    Total Downloaded
    0
    I got a set of the ARP studs which they developed specifically for the 4.0/4.6 10-bolt head. They recommended 90 ft lbs
    Thanks to advice from this forum I used 65ft lbs (3 stages) with the composite gasket (Elgin). So far so good. A couple experienced aviation engineers thought 90 was way too much and supported 60-70 (max) especially with the Elgin composite gasket which appears to be quite reliable.

    Was interesting that when I removed the heads, they were fitted with the original metal gasket! (Thor 4.6 July 1999 build)
    MY99 RR P38 HSE 4.6 (Thor) gone (to Tasmania)
    2020 Subaru Impreza S ('SWMBO's Express' )
    2023 Ineos Grenadier Trialmaster (diesel)
    Reply With Quote Reply With Quote
  4. 28th January 2013, 06:37 PM #4
    Davo
    Davo is offline ChatterBox Silver Subscriber
    Join Date
    May 2007
    Location
    WA
    Posts
    2,595
    Total Downloaded
    0
    Yes, with lots of reading you can see that there have been a few cases of block threads failing with the higher numbers, like 80 or 90.

    Pedro, that was your photo I used for reference but I couldn't be bothered re-reading everything again to find it!
    At any given point in time, somewhere in the world someone is working on a Land-Rover.
    Reply With Quote Reply With Quote
  5. 28th January 2013, 06:48 PM #5
    MacMan's Avatar
    MacMan
    MacMan is offline Wizard
    Join Date
    Jan 1970
    Location
    Forty minutes closer to the hills in a house the bank is kind enough to let me live in
    Posts
    1,532
    Total Downloaded
    0
    On my 3.9 rebuild I ran Payen tin gaskets (coated with Hylomar spray) on 14 bolt heads, 10 main bolts in standard order in 3 cycles of 25/50/75 ft/lb. Outer bolts done to 10 ft/lb only. All good 6 months/14,000km later.
    Reply With Quote Reply With Quote
  6. 29th January 2013, 11:53 AM #6
    Davo
    Davo is offline ChatterBox Silver Subscriber
    Join Date
    May 2007
    Location
    WA
    Posts
    2,595
    Total Downloaded
    0
    Hey MacMan, I remember replying to your V8 problems thread last year, but just discovered your engine build thread yesterday with the lovely photos. Good to see it's been running well, at last.
    At any given point in time, somewhere in the world someone is working on a Land-Rover.
    Reply With Quote Reply With Quote
  7. 29th January 2013, 04:06 PM #7
    MacMan's Avatar
    MacMan
    MacMan is offline Wizard
    Join Date
    Jan 1970
    Location
    Forty minutes closer to the hills in a house the bank is kind enough to let me live in
    Posts
    1,532
    Total Downloaded
    0
    Thanks Davo.

    I have enough "distance" from the horrors of it all that I smile every time I drive it now. I'm even careful about which shoes I wear since some feel like all ankles when I go to heel-and-toe it.
    Reply With Quote Reply With Quote
« D2 brakes | Is my TD5 head soft? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!