Hi Gents,
I bought the RaveII disc from Inc to find out how to remove my air con for inspection inside as there is water in the pax side foot well and a sloshing sound when turning corners. Well do you think I could find my factory model on the Rave disc...No sirree..Tis a 98 Defender and the air con looks nothing like the one for it in the manual...So over a cup of tea I peruse the Td5 part out of morbid curiosity and there it is in all its glory my aircon listed as a 99 model factory unit..yee ha.
Problem was the drain pipe had blocked and worn through the gromet and the pipe and was leaking/overflowing.....

Also I replace my dead thermo fan (10") with a brand new 12" jobby and kicked off the aircon and it didn't turn on..spew..left it for a while and still nothing..So wired it up to the compressor clutch wire so it runs when the aircon does and oh soo much cooler in the cab now , I know this as I have an Engle dash thermometer mounted which gives ambient temp and fridge temp, I highly recommend it as I can monitor the temp now with out climbing in the back...