Hi all, i have been asked to do a sticker for someones defender as a present for someone so they cant just ring the guy and ask the dimensions of the rear window. I was wondering if someone could throw a tape over theirs and tell me how big it is. Thanks, Matt

130 dual cab rear window
Glass area is 890mm x 345mm with a split in the middle... ie two pieces of glass.
radius corners with ~50mm rad.

S

I've got a single cab 130, with a single piece rear window, and from the "inner sides" of the rubber sealing strip it is 880mm x 335mm.

Spudboy - could you tell me a bit more about your single piece glass rear window? I have just smashed one of the sliders, and am considering going down this path if feasible. How was it done?

My 130 is an ex-Telstra car with an extended single cab.

Unfortunately I can't take a photo of it any more as I am building it into a camper and have cut a big hole in the back of the cab to crawl through to the canopy

All I've got is a couple of photos as I was cutting the back away:






So you'll have to imagine what this was like with the glass in.

The glass was just a single sheet with the dimensions given above.

Does this help at all?