|
|||||||
| The Verandah This section is for Vendors to post new products, services, announcements, group buys, website specials, or anything else that AULRO visitors might be interested in, as well as to encourage more interaction of Vendors with the AULRO userbase. You can only post a new thread in this area if you have a vendors subscription. |
 |
|
|
Thread Tools | Display Modes |
21st February 2010, 06:01 PM
|
||||
|
||||
|
Bugger Bugger Bugger....I have been waiting for this to happen and now I don't have the cash due to new springs, the disco head gasket and the tyres coming up from melbourne. and the shocks that I'm certain my disco needs...
Will you be doing any more for the Puma Philco.....???? I don't want to miss out on the guard but I'm certainly going to be broke until next pay day in 2 weeks
__________________
Our Land Rover does not leak oil! it just marks its territory.......  
|
|
21st February 2010, 09:53 PM
|
||||
|
||||
|
Quote:
|
|
22nd February 2010, 08:32 PM
|
||||
|
||||
|
Gday Phill
Pm sent this is an old pic of my bullbar and snatch hooks tell me if you think they will be in the way.Also a front on pic, it has brackets mounted on the inside which my hooks are attached to.Have a quick look if you need another angle(pic)let me know.  
__________________
Aaron & Jacinta 1994 300Tdi Defender 
|
|
22nd February 2010, 08:44 PM
|
||||
|
||||
|
The guard will be mounted on the outside of the chassis, the recovery points can be mounted on the outside, i have added on the new design, 2 holes at the front of each side for recovery points, please see the pic of my defender on the first page of this thread with the hooks on the outside.
__________________
 1995 Defender130 300 Tdi Daily driver 1992 disco project offroad toy
|
| The Following User Says Thank You to philco For This Useful Post: | ||
MacFamily (23rd February 2010) | ||
|
22nd February 2010, 08:54 PM
|
||||
|
||||
|
Hi
Can you put me down for one please. I will have one for my 300 TDi 110. I can come and pick it up as i am down the gold coast all the time. Cheers Ali
__________________
Defender, Good enough for the Queen, good enough for me 95 300 Tdi Defender 90 99 300 Tdi Defender 110 www.reads4x4.com
|
|
23rd February 2010, 09:32 PM
|
||||
|
||||
|
hi to all interested in these guards, I have been inundated with orders and had only done a small run on them not expecting them to be so popular, I have a 2nd run on order to go through the laser cutters in the next week, 5 standard guards and 5 arb compatible guards, I will honour all orders and try to get them ready as fast as i can, My apologies to everyone for the delays, This is the first time i have done business with Aussie manufacturers as I have in the past only ordered from overseas and sold the stock when it arrives. I want to keep with the local made items and designs and do not want to go to Asia to get everything made.
I hope I have not p#*^#d anyone off and am doing my best to get these done. Regards Phil
__________________
1995 Defender130 300 Tdi Daily driver 1992 disco project offroad toy
|
| The Following User Says Thank You to philco For This Useful Post: | ||
flagg (25th February 2010) | ||
|
19th May 2010, 06:46 PM
|
||||
|
||||
|
Hi all, I got a new batch of steering guards for defenders available in a week or 2 the process to finished product has changed a bit. I am now getting them zinc coated then powder coated. works out better for me than galvanising.
If you have a different choice of colour to black please let me know, it may take a week longer to put thru the powder coaters. 4 x std guards 4 x to fit vehicles with ARB bullbars
__________________
1995 Defender130 300 Tdi Daily driver 1992 disco project offroad toy Last edited by Outlaw; 10th January 2012 at 10:13 PM.
|
|
19th May 2010, 08:27 PM
|
||||
|
||||
|
Hey Philco
What's the difference between the standard guards and the ones to fit Arb bullbars? Only reason I ask is we have a Mantec winch bar on ours.
__________________
Our Land Rover does not leak oil! it just marks its territory.......
|
|
19th May 2010, 09:07 PM
|
||||
|
||||
|
Std ones fit directly onto the outside of the chassis rails and the ARB ones are 10mm wider to allow for the bullbar mounts on the outside of the chassis rails.
all holes are to fit directly onto the existing holes in the chassis. I have added another hole at the front of the guard to be drilled out for a recovery hook on each side as in my pics on the first page.
__________________
1995 Defender130 300 Tdi Daily driver 1992 disco project offroad toy
|
| The Following User Says Thank You to philco For This Useful Post: | ||
dullbird (19th May 2010) | ||
|
19th May 2010, 09:38 PM
|
||||
|
||||
|
I am currently in the market for a new bullbar. I will certainly place an order once I have finalised the bar.
__________________
2003 L322 Vogue 4.4, 1996 300TDI Defender Extra-Cab (The Skank Whistle), 1994 P38 Vogue 4.6.
|
| The Following User Says Thank You to HUE166 For This Useful Post: | ||
philco (21st May 2010) | ||
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
