Printable View
There was also a Scottorn Bushmaster powered trailer and Series III 1 Ton combination in Australia. Both prototypes bought out of the Rover Special Products factory, first saw it in 1974 and later the tractor in Alice Springs in the early 1980's.
Unfortunately the owners of the tractor didn't know about the trailer and thought the drive coupling was only a PTO unit.
Thats impressive :cool:
We called for some help as 'herc' wouldn't start, CC to the rescue:)...found a faulty wire to the coil which was rectified and now he runs sweet...the radiator looked interesting so off to our radiator person for a look see...probably a new one:)
https://www.aulro.com/afvb/images/im...14/03/1123.jpg
https://www.aulro.com/afvb/images/im...011/05/437.jpg
the clutch master and slave cylinder were purchased today, (this is the reason that it was sitting at the mechanics in the first place) so while out the pedal
got makeover along with the steering wheel, flash aren't they;)
https://www.aulro.com/afvb/images/im...012/04/131.jpg
Extreme poped over this morning to collect his AULRO jumper, he and HH took the rear wheels of to check brakes, half shafts and wheel bearings...all look great so wheels back on after a clean up:D
we are moving very quickly forward with this vehicle....
while 'bessie' is crying in the background:(, she will get there I can assure everyone
:(:D
https://www.aulro.com/afvb/images/im...011/05/438.jpg
https://www.aulro.com/afvb/images/im...011/05/439.jpg
Mrs hh:angel:
The steering wheel looks much better.
Am I coming back this weekend to refit the clutch pedal and sort the black out switch wiring?
How did the brakes look?
CC
All looking very bright and shiny! :BigThumb:Quote:
Originally Posted by The ho har's
Is Bessie still sitting on the trailer so Digger can pick her up? :D
Diana
Quote:
Originally Posted by Col.Coleman
Looked like brand new:D and the bearings had new grease in them...PeterP is coming over tomorrow in his 101 for a look see around 10am:D
Mrs hh:angel:
Quote:
Originally Posted by Lotz-A-Landies
Bessie is sitting on the car hoist and has been for months......well most of the time anyway... I don't think digger is interested in bessie as he has his own 2a's but a 101 may be different, and we won't go anywhere near the
MMMMMMMMMgunbuggyMMMMM area will we:p:D
Mrs hh:angel:
Clutch cylinder in, slave in sortly, radiator ordered will be here on Friday...was pressure clean yesterday, chassis and motor/gearbox...yeah yeah will take photos in the morn;)
runing along quite smoothly ATM:D
Mrs hh:angel:
Quote:
Originally Posted by Mick_Marsh
Finally checked today and the motor is original as is the chassis as per the REMLR site :D
So that would be a 3.5 Australian delivered then.Quote:
Originally Posted by The ho har's
Good buy!
Any idea of it's name?