Stuee's 101 Rebuild

Quote:

---

Originally Posted by stuee

Lovely. I'll have to revisit my original order from to the 101 club, remove the brake bits and see what he can supply.

A post has just been put up on the 101 forum saying its a shame I cancelled because my order was about to be shipped... :rocket:

Edit* Does AJ respond to emails or is he best to talk to over the phone. I've only ever spoken to him once before and that was about potentially obtaining a 101 that he was importing (before this one).

---

Emails and phone. Shouldn't be a problem.
I go visit.

Quote:

---

Originally Posted by Mick_Marsh

Emails and phone. Shouldn't be a problem.
I go visit.

---

Easy for some :p Will fire him off an email this evening and see what wares he has on offer.

I phone AJ and over the years we have gotten to trust each other .
I ask for for the parts.
He freights the parts.
I then send a cheque.
He has new wheel cylinders and brake shoes ( same as long wheel base series 3 landys).
He has kits for the master cylinder (see my thread on this )
Alot of 101 parts will match up with later series 3 or early range rover.

Spoke to AJ for the first time last week, very pleasant, and organised. Will be talking to him again. Signed onto the 101 UK forum hunting down the for sale advert for my old 101, which was still live, got a reply, then the Administrators locked the post! Asked where it had gone and got a curt reply saying it was an old thread and so it's been locked! Uhhh? So, yeah, I hear ya re the club. Not the first time I've heard this either!! Anyhow, here I am glued to another 101 thread!! The 'Swap' advert went into the correct section an hour ago!!! Stuee, great thread, looking forward to seeing it complete!!! :)

Quote:

---

Originally Posted by stuee

Also I had issues finding replacement bulbs for the dash instruments. I have found this website that sells replacement items that use more readily available bulbs for a reasonable price:
Land Rover Spares, Land Rover Parts, Landrover Parts, Landrover Spares

---

I have been able in the past to supply the hard to get dash board globes in 24 volt etc though my parts suppliers for forklifts via a import from Europe.
The problem was it was very, very expensive to do this just for a few globes.
If you get stuck talk to me.
Ron

Quote:

---

Originally Posted by 101 Ron

I have been able in the past to supply the hard to get dash board globes in 24 volt etc though my parts suppliers for forklifts via a import from Europe.
The problem was it was very, very expensive to do this just for a few globes.
If you get stuck talk to me.
Ron

---

Thanks Ron. I've already received some of the replacement fittings from the dingocroft mob. I need to check they all fit properly, only tried one of the three types of fittings I purchased so far. Ill post up how they go over the weekend, but the quality seems good. Along with the LED's I sourced from RS shown in previous posts all the dash illumination is now sorted. I want to start hooking wires up this weekend :cool:

If anyone's interested the three part numbers I ordered are:
ZZAS614
ZZAS615
ZZAS612
All shown on this page:
Electrical Miscellany Page 2

Anyone able to help me with one of the earth lead locations? I've re-made the earth lead that goes between the chassis and battery but as a modified outrigger was welded on I have nfi where the original attached too. The workshop manual gives a rough idea but I'd like to see where the original goes if anyone has any pictures handy.

New earth lead:
https://www.aulro.com/afvb/images/im...013/03/321.jpg
https://www.aulro.com/afvb/images/im...013/03/322.jpg

Its 2B&S cable and should be a bit nicer to use than the old one which is quite heavily corroded and frayed. Just need to source some new p-clamps now.

Mine is bolted to the body - top left of the panel behind the passenger seat.

Garry

Quote:

---

Originally Posted by garrycol

Mine is bolted to the body - top left of the panel behind the passenger seat.

Garry

---

So does your not bolt to the chassis outrigger below the battery box?

edit*
https://www.aulro.com/afvb/images/im...013/03/320.jpg

I just ripped this from the workshop manual. I cant tell where abouts on the outrigger it mounts or how its secured up to the battery box. I figure I wont be on the wheel arch side of the outrigger because that would expose it to damage from gravel rash, but then the entry to the battery box is at the top of the wheel arch :confused:. I'm assuming it runs on the inside of the outrigger and up, but not sure how its retained, perhaps through the galv rail then out?

Small amount of work done today and yesterday afternoon. Also heard back from AJ regarding some parts, just waiting to hear back if he can source any others from his suppliers.

A good friend has said he can get me some protective wire wrap through his work. Ill run most wires and fix them temporarily in position before I measure up exactly how much I need and what sizes I need.

Starting to run wiring:
https://www.aulro.com/afvb/images/im...013/03/274.jpg
https://www.aulro.com/afvb/images/im...013/03/273.jpg
The three holes most dash wiring will go through:
https://www.aulro.com/afvb/images/im...13/06/1226.jpg
https://www.aulro.com/afvb/images/im...013/03/275.jpg
https://www.aulro.com/afvb/images/im...013/03/276.jpg
https://www.aulro.com/afvb/images/im...013/03/277.jpg
https://www.aulro.com/afvb/images/im...013/03/278.jpg

Also got the bulkhead capping's fitted finally:
https://www.aulro.com/afvb/images/im...013/03/279.jpg