Hi Guys,
This might help
Cheers
Danny
Printable View
Hi Guys,
This might help
Cheers
Danny
good find Danny
thanks
peter
While your at it pull the moter out, mine had rust inside on the cover.
I also pulled the gearset apart and fresh grease through out
One of the bigger problems I have encountered with my own one in the early days of using it was the inner oil seal giving out and flooding the motor with oil. I replaced all the oil seals on my one when I had it apart. Common seal here in NZ and pretty inexpensive.
Hey Danny, the document you attached seems to only have the first page of a manual in *.TIF format, would you have the document in PDF or similar?
Cheers,
Phil
This one is a pto driven winch, no motor.
[QUOTE=windsock;1222857
Hey Danny, the document you attached seems to only have the first page of a manual in *.TIF format, would you have the document in PDF or similar?
Cheers,
Phil[/QUOTE]
It has 33 pages. Downloads and opens in Microsoft Office. Should work with Open Office.
Cheers
Danny