Quote:
Originally Posted by dmdigital
None of them look like they have the handle removed but the plastic which forms the glove box looks like it sits on top of the handle making the handle only grab-able from underneath
Printable View
Quote:
Originally Posted by dmdigital
None of them look like they have the handle removed but the plastic which forms the glove box looks like it sits on top of the handle making the handle only grab-able from underneath
G'day Dullbird,
Not the case, I fitted mine the other day and it does not interfere at all.
I am pleased with mine, but more inportantly so is my better half
rrrrrrrrrrr Yes I see:).Quote:
Originally Posted by jake
Mmmmmmmmmmmmmmm:)
Blast didn't turn up this week :(
Oh well at least the extra Croytec bits did :)
Hi there.
How does the lid stay closed on the glove box....velcro?
I used the old style kitchen cupboard latches.
Velcro is used just to cushion the hole where the pins go in, you could also use A thick foam. It was something I had handy at the time. Only purpose is to stop any rattles should they occur. Gloves box is big enough to fit sat phone pluse portable UHF and other small items
Well it arrived on Wednesday but didn't get around to installing it until today. Took about 20 minutes and about 2 litres of water, it is bloody hot outside even at 5pm :(
The lid stays closed thanks to the two locating poles that slot in either side of the plastic cover. You remove the metal clips from these.
I've added a couple of rubber tabs to help stop any rattle. Pic's to follow.
Here is another option. Might get a picture of the 'handle' version tomorrow.
Attachment 31006
It's a straight replacement for the standard top cover and grab handle, using the same screw/bolt fittings. A five minute job at most.
Material: Moulded and folded ABS, bead blasted to give it the same matt finish as the standard interior.
Concealed push-to-close grabber latches pull and hold the lids securely closed.
Cheers,
Daniel
I like!Quote:
Originally Posted by Mulgo
Where can we get the one with the grab handle?
nice work daniel
