Printable View
Managed to take a few pics of the suspension this afternoon after work.There is nowhere around here close to test the suspension,so I had to manage as best I could.The suspension is nowhere near its maximum drop or compression,but I had nothing else handy to test it with.The first spring picture is of the L/H rear,and still have quite a lot of compression left.The second spring picture is of the R/H rear,and shows there is a lot of drop left,spring is still connected.
Wayne
Some more pics from this afternoon.The first spring picture is of the R/H front,showing a lot of compression left,but body is sitting flat despite the flex,and that is what I was looking for when trying to set up the suspension.The second picture is of the L/H front,flexing a little,again nowhere near max flex.
Wayne
LowRanger, that looks good man, must be happy with how level it sits. Sorry no flex pics yet, I will be getting some tomorrow.
Hally, the part numbers, front: C70-296VT
rear: C70-297VT
I will be down that way then so I will try and keep it open for a run, I am going to cruiser park from the 1st to the 3rd, then going to Mt Binna Burra from the 5th to the 8th then we are hanging around I don't need to be back in Townsville untill the 20th, I would be keen for a run with some locals.
Just as a side note - keep an eye on your uni-joint angles with the added movement. You might find them binding at some angles
Cheers
Chris
P.S - if you're working for Al Stephenson up there tell him he's a big poof and to buy a Landrover! :)
Quote:
Originally Posted by cewilson
That is why I only went for +2" lift,just enough to clear 35's.I already have wide spaced uni's in the rear.
But with 8" of bumpstop clearance,lambrover will go close I think.
Wayne
Hi Guys,
very impressive, have you changed radius arms or castor bushes etc, is there anything else needs to be changed? :cool:
Scotty P
cewilson, thanks mate but the county has wide angle uni's.
and I don't know your mate, what unit is he at.
got some pic's today.
lambrover,have you cycled your suspension to check if your bumpstops work,before your shocks bottom out?You suspension travel looks very similar to mine,just judging on the pics.
Wayne
Yep the shocks are set up so that it could rest on the bump stops no problems.
Hey Lambrover how long did your springs take to arrive?
Springs ordered now we wait:twisted: