Printable View
Ok rechecked all fuses and relays and all good
If I pull multifunction switch forward high beam comes on
Push it forward nothing
Checked the plug on this and all good
Tried getting this switch off and I've got no idea
Advice on removing this switch?
Thanks
Scotty?
From memory I think the first step is to remove the steering wheel, but can't swear to that. In this sort of situation, I find it useful to use either a multimeter or a test light with one lead earthed and the other attached to a sharp needle that can be pushed easily through the insulation to check where the voltage is going. Use in conjunction with a wiring diagram.Quote:
Originally Posted by scottygc
John
With the ignition switch turned off, you will get no headlamps except sidelights and high beam flash...Try turning the ignition on.
JC
well there you have itQuote:
Originally Posted by justinc
a simple turn of the key and its all fixed
arnt i clever (not)
thanks to all that helped
scotty