Originally Posted by 
wrinklearthur
				 
			Hi Numpty
 
When confronted with a shaft or bolt that wont budge, I do it up tighter and give it a whack to force it even tighter again, this will crack the bind. 
 
Then undo the nut a couple of turns only and use a puller if possible, or that rocking motion mentioned before, while tapping briskly using an old half inch drive extension, a socket with a sacrificial nut on top of the original nut, ( that has only been loosened a couple of turns, ) the socket should then bottom out onto the sacrificial nut before touching the steering wheel hub.
 
Don't take the nut completely off and pull because if the wheel does come quick, you will be sorry, look ugly, have a broken nose and be with two black eyes. :eek:
 
Another trick, is to use on the shaft some freeze spray.