Page 4 of 4 FirstFirst ... 234
Results 31 to 34 of 34

Thread: Rear Coil Springs:- 1985 110 County

  1. #31
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    The theory is not the same as the real world in LR's case.

    I run 2 Red/Red OR 2 Red/Green, a mix of both causes the lean.

    The Red/Red increases the vehicle lift by about 10mm.

    Currently I have a pair of red/green, sits level and is a good height

    JC
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  2. #32
    Join Date
    Aug 2015
    Location
    Brisbane
    Posts
    93
    Total Downloaded
    0
    By the kings website KRRS-02 is front and KLRS-04 is rear standard height springs for a 1985 110 county station wagon with load leveler.
    Shopping around, the KRRS-02 is easy to find, it's the same as the rear spring on range rover classic 150lb/in.
    KLRS-04, not so easy, as of today when I called king springs, KLRS-04 for county rear with load leveler is no longer produced... He said 220lb/in spring rate on these and they have nothing similar.
    KLRS-05 which is for models without load leveler, is 470lb/in he says.
    They do still sell KLRR-05 which is the 470 spring rate, but raised.
    Side note: OEM spec is 330lb/in for NRC6389 and NRC6904 (this would explain getting a bumpy ride changing from OEM to kings rears)
    Fortunately NRC6389 and NRC7000 are available from the usual land rover suppliers and show 180lb/in spring rate, which is a lot less than that 470, so hopefully my 110 rides like a range rover ha ha.
    I did check dobinsons and lovells catalogs, same deal, no one here makes the standard height rear coil in softie spec.
    Maybe I will quickly find out why

  3. #33
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    150lb in the front is pretty light. Assuming it's a V8 With no bullbar etc????
    I run kings front, dobo rear. 210lb front, 318lb rear, isuzu, f&r bars etc..about 30-40mm lift though

  4. #34
    Join Date
    Aug 2015
    Location
    Brisbane
    Posts
    93
    Total Downloaded
    0
    Good point, I just took that 150 from red90 website.
    I'm not certain which RRC coil is used in 110 front, do you know which one was used here?

    I got info from Kings today, KRRS-02 is a 230lb/in spring rate, free height l/h 405mm r/h 415mm

Page 4 of 4 FirstFirst ... 234

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!