Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36

Thread: 300tdi defender towing woes...

  1. #21
    Join Date
    May 2007
    Location
    Byford, WA
    Posts
    1,317
    Total Downloaded
    0
    Hi Joshua,
    If you do the P gasket yourself and the water has been leaking for a while the bolts could have corroded into the aluminium housing, be mindful of the the job could turn into a suicide pack in an instant............

  2. #22
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    maybe I'm a little cynical, but I do have a little chuckle when I read these threads and the references to the performance of the 300tdi in defenders and towing. Phrases like "never felt it at all" and "tow 2.5t with ease" always make me wonder how valium is available over the counter

    regarding the R380, no one is more surprised than me that mine has survived 320k and at least 250k of that towing a true 1.8t. It has only been getting syntrans for about 40k, but was always serviced prior to that. I was unaware of the 5th gear issue and can only put it down to the fact that when on the HWY any incline would require a drop back to 4th to maintain any reasonable egt and speed (certainly not 100km/h or above). This would help with oiling and load on 5th.

  3. #23
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    check the throttle cable...

    SWMBOS has broken the clip again and has lost about 1/4 of its range of motion and pulls like a series with a lead off.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  4. #24
    schuy1 Guest
    Quote Originally Posted by Blknight.aus View Post
    check the throttle cable...

    SWMBOS has broken the clip again and has lost about 1/4 of its range of motion and pulls like a series with a lead off.
    I had forgotten about that little trick Blknight , Or it backs itself off with vibration from a prolonged drive and you get slower at the hills Really got me head scratching the first trip to Emerald . Not a problem after some nice black silastic!

  5. #25
    Join Date
    Aug 2012
    Location
    Kinglake
    Posts
    39
    Total Downloaded
    0
    I've attached a pic of the leak/ evidence. It looked to be emanating from the pulley. Is this we're the P gasket is?

    And I'm probably not painting a good picture of how it drives. It pulls okay but I feel like she's revving too hard to pull at the speed. The turbo is whistling and whining when maintaining 80 indicated. It sounds like music to my ears, but its prolly gonna wear or break stuff, like idlers, tensioners bolts, belts and water pumps... (It had a 7pk 1595 fitted when it I'm sure it needed a 1580 serp belt, which is fitted now - I'm thinking this stuff up may have exacerbated all these 'issues')
    Attached Images Attached Images

  6. #26
    schuy1 Guest
    I would say it is your pump, with the possi of the P gasket also.Although your pic does not show the P. It generally manifests as a leak down the left side of the block in front of and beneath the exhaust manifold. If when you remove the belt and rotate the pump it is rough or as you said leaks more that is a problem.

    Cheers Scott

  7. #27
    Join Date
    Aug 2012
    Location
    Kinglake
    Posts
    39
    Total Downloaded
    0
    Thanks all for the replies. I'm not sure the p gasket is on the job sheet, nor been ordered from Rockhampton, so hopefully it's not too bad.

    The accelerator cable clip looks okay, I think. I'll have too look into it some more.

    I'll re-read all the posts, but I'm gathering towing in fifth with an r380 is doable, at your ow risk... Towing in fourth is fine, but there are mixed thoughts about revving high for sustained periods. That sorta leaves me where I started, but I'll try 5th some more, judiciously. I suppose if I hear noises, back to 4th.

    As for the tappet drift, I'll have the caps/valves/pushrods inspected in maroochy, and the pump tweaked too! Now it's just waiting for 8 hours.

    Joshua.

  8. #28
    Join Date
    Aug 2012
    Location
    Kinglake
    Posts
    39
    Total Downloaded
    0
    Well after a wrong part order, it now fixed - the water pump that is. No more leaks!

    The damage? Well, lets just say I could have bought 11 cartons of beer, good beer...

    Sorta takes the gloss of things when travelling. Onwards we go.

    Joshua.

  9. #29
    schuy1 Guest
    Ouch!! You should have grabbed it ,drove down to my place( a few hours away) had a coffee and I would have changed the pump over for you!. Ah well should all be good now And the coffee offer is still available Lol.
    All the good sailing should be yours now!

    Cheers Scott

  10. #30
    Join Date
    Aug 2012
    Location
    Kinglake
    Posts
    39
    Total Downloaded
    0
    Quote Originally Posted by schuy1 View Post
    Ouch!! You should have grabbed it ,drove down to my place( a few hours away) had a coffee and I would have changed the pump over for you!. Ah well should all be good now And the coffee offer is still available Lol.
    All the good sailing should be yours now!

    Cheers Scott
    I know!!! I sorta thought since the were the RACQ mob, it'd pay to keep onside, but not that much onside!

    We bolted yesterday, so we didn't stop with the kids not fighting and made it to the sunny coast in one hit. Car went into 5th too! Thanks for the offer though.

    My poor Landy copped a hard day so she deserves a good wash and going over by someone who knows these machines.

    Hope to bump into you one day.

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!