Quote:
Click for company profile
About Us | Contact Us | How To Order | Terms & Conditions
Location: »DIY Rebuild kits» LT230 REBUILD KITS
Input gear
Input gear
Product Information
We can supply both the earlier (26th tooth) and later cross-drilled (26th and 28th tooth) input gears.
To identify which type you need you will need to look at the your transfer case serial number. The last letter of this will denote whether your vehicle is able to accept the later cross-drilled type. A transfer box with the suffix A or B will only accept the earlier 26th tooth, non cross-drilled type (FRC5428). A transfer box with the suffix C onwards will accept the later cross-drilled type. See below to find the serial number :
Defender Guide :
Suffix A or B uses a FRC5428, not available cross drilled @ £ 45
Suffix C to F uses a FTC5089, cross drilled @ £ 45
Suffix G, 300 TDi or TD5 uses a FTC4962 @ £ 65,
Suffix G, 2.4 TDCi uses a IEH500010 @ £ 65,
Disco Guide :
Suffix C to serial number 308626E uses a FTC5089, cross drilled @ £ 45
Serial number 309143E to 551442F uses a FTC5087 @ £ 45,
Suffix G uses a IEH500010 @ £ 65,
If you look up the IEH500010 you will see it is the fine tooth LT230Q gear, the same as fitted to my (broken) case.
Quote:
INPUT GEAR 38 TEETH Q TYPE LT230 OEM 135mm
Input Gear for Transfer Box LT230 'Q' Type Defender V8 1.2 Ratio & Discovery II 1.2 Ratio
38 Teeth 135mm Overall Length
Fits:-
Defender V8 1.2 Ratio From 2003 Suffix G on Boxes
Discovery II 1.2 Ratio Suffix G on Boxes
Note This Gear does not have dog teeth drive gears for PTO so is not suitable if your vehicle has, or you intend to fit a Power Take Off unit.
IEH500010
