How to bleed brakes on PUMA with ABS?

A nanocom cannot powerbleed brakes on a puma 2.2
But can do on a puma 2.4 or a TD5
The 2.2 apparently ha a Bosch ABS System which nanocom can communicate with and read faults but no brake bleeding

Quote:

---

Originally Posted by dfendr

A nanocom cannot powerbleed brakes on a puma 2.2
But can do on a puma 2.4 or a TD5
The 2.2 apparently ha a Bosch ABS System which nanocom can communicate with and read faults but no brake bleeding

---

Thanks dfendr, you are correct.
From the nanocom user manual v1.26

Extract:-

Bosch ABS System: Puma 2.2 only:
The Bosch ABS system has been the chosen ABS system for the Defender Puma 2.2 and so, is a relatively new
application for the Defender Puma for the Nanocom.
As this application develops further, new functions and coverage will be added to it.
Currently, this application supports full fault code reading and clearing, ECU information as well as an inputs
section for monitoring the same live data that the ABS ECU receives.


Looks like I need a trip to the dealers

Hi All.

Information for those following this thread.

The ABS has now been bled, and the pedal is now firm.
What I did, I waited until it rained and then I went out in the rain and braked hard so that the ABS activated.
I did this several times, and after that, the pedal was firm.[bigsmile]