Results 1 to 3 of 3

Thread: Clutch slave?

  1. 29th December 2013, 08:36 PM #1
    ted44
    ted44 is offline Master Subscriber
    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    116
    Total Downloaded
    0

    Clutch slave?

    Hey I've just discovered something interesting! (maybe or not) I bought a master and slave a while ago, for a trip I was going on , anyway cutting a long story short I was sold a 200Tdi Slave instead of a 300Tdi Slave, which I have installed and still can't get the Clutch to engage a gear with engine running, (See thread Flatbed but lucky) Would a 200slave installed on a 300tdi make a difference??
    Anybody know for sure?
    Cheers ted
    Reply With Quote Reply With Quote
  2. 29th December 2013, 09:52 PM #2
    wrinklearthur's Avatar
    wrinklearthur
    wrinklearthur is offline ForumSage
    Join Date
    Jan 1970
    Location
    under a rock, next to a tree, at Broadmarsh
    Posts
    6,738
    Total Downloaded
    0

    difference in the slave cylinders

    I had a little look in the parts book and it appears that the 200 TDi slave cylinder has a slight difference in the position of the face of the mounting flange compared with the 300 TDi slave cylinder.

    You will need a spacer for the 200 TDi slave cylinder, the part number is FRC 2402, it fits between the flywheel housing and the flanges of the slave cylinder and I think it is about 4 mm thick.

    There is also a change in the push rod part numbers, part number FTC3912 to gearbox number 56A 0669086K, part number FTC5199 from gearbox number 56A 0669087K, I don't have easy access to the two different types, so I can't determine if there is any difference in their length.
    .
    Reply With Quote Reply With Quote
  3. 29th December 2013, 10:26 PM #3
    ted44
    ted44 is offline Master Subscriber
    Join Date
    Apr 2012
    Location
    Brisbane
    Posts
    116
    Total Downloaded
    0
    No it didn't have the 4mm spacer just the flange/backing plate the came off the old one I'd taken off! This is interesting. The part number of the unit I've put on is FTC2498G.
    Also I thought the 200tdi's hade a different gear box?
    Reply With Quote Reply With Quote
« 90 or 110 For Touring | Blew my Diff .... :( »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!