The 4.3mm ones we sell are more than up to the job of being stood on, as is the bonnet plate, i would not go for anything less that 3...
Printable View
The 4.3mm ones we sell are more than up to the job of being stood on, as is the bonnet plate, i would not go for anything less that 3...
Hey Juddy,
Looking at replacing the crappy wing top checker plate on my SVX and doing the bonnet at the same time.
Do you have stock for both in black and how much ?
Cheers
Grant
Hi grant
Yes stock on both call email landybitz direct for aulro pricing.
Cheers
Justin
I haven't put chequerplate on the MY D90, but after yesterday's little "incident" with my Series 2a I may well bump it up the priority list:
https://www.aulro.com/afvb/images/im...014/01/299.jpg
A loud crash in the early hours of Monday morning resulted in my spending a couple of hours swinging the chainsaw around. The chequerplate has sustained some damage, a decent dent, but I'm pretty sure it would have been worse on the fender without it! I'll follow this up with a photo of the chequerplate damage later. I'll also try and measure what thickness this plate is.
Justin, you might get an order from me fairly soon;)
Ciao
John B
Owch!!Quote:
Originally Posted by JayBoRover
I put black anodised plate on our TDI, as I wanted to avoid reflections you'd get off mill-finish ally.