MY14 110 Cargo Barrier questions

Thanks for all the replies. Time for an update.

I called Autosafe and they were very accommodating. I have fitted a DIY false floor (thick plywood on an aluminium frame) in the back of my 110 and needed to have the barrier custom fitted to match.

After only a phone call and a couple of emails, including me providing a few measurements and photographs, they sent me a barrier they had made to fit my requirements. The whole process was complete in a matter of days and I am very impressed with the end result.

Fitting was initially very fiddly in terms of getting my fat fingers into the channel to replace the passenger hand holds with the barrier fittings. However, the rest was a breeze.

I put it all in for a test fit and it's all good, so left it there for the time being.

I'm in the process of arranging fitment hardware for my fridge and cargo, together with finishing the other components for durability (paint etc).

I will post photos once I'm finished the build.

Cheers,
Nige

How's the build going Nige?
Keen to see some pics!

Sorry Dan, had a few delays with limited time off and plenty of pre-arranged non-Defender stuff to do. I plan on getting a lot more done in a few days time and pics will follow :)

Any updates Nige?

Yes mate. I finished the install Friday morning. I've just finished a huge shift at work and I'm knackered, so will post an update Saturday sometime.

Sorry it's taken so long ;)

Watch this space (or perhaps Members Rides… I will decide after some sleep).

OK. I've started up a whole new thread in the "Members Rides" section, detailing Agnes as I've developed her so far. That thread includes pics of how I put together the false floor over my spare in the cargo area.

I mentioned in that thread that the blokes at Autosafe custom made me a cargo barrier, based on some photos and measurements I sent to them via email.

I finally installed it all the other day, but here are a few more specific shots of the cargo barrier.

Quote:

---

Originally Posted by noyakfat

OK. I've started up a whole new thread in the "Members Rides" section, detailing Agnes as I've developed her so far. That thread includes pics of how I put together the false floor over my spare in the cargo area.

I mentioned in that thread that the blokes at Autosafe custom made me a cargo barrier, based on some photos and measurements I sent to them via email.

I finally installed it all the other day, but here are a few more specific shots of the cargo barrier.

---

That's come up a treat , I stretch me bungy straps on mine , easy to reach and out of the way !!.. Jim :)

I like the look of that barrier. Can I ask how much it cost? Planning to fit a barrier to mine once I get the drawers in, so researching. Tradesman racks were cheaper than Milford and Autosafe, but I haven't decided.
Looking at yours, there appears to be enough width between the seatback and the barrier to fit one of the Boab slimline 42 litre water tanks, which is what I plan to do eventually.

Hi Mick,

The Autosafe barrier cost me $566.50 delivered, and is an excellent fit given they made it up from my measurements and a couple of emailed photographs of my false floor set up.

Further, once I confirmed the order, I had it within a couple of days!

Cheers,