Puma 130 Steering Issue

Have you had the turbo hose recall done?
I had the same symptoms after the 'fix' was done.
The new bracket was fouling on the bolt of the steering shaft uni joint as the engine moved during higher revs.
Dealer obviously didn't do a test drive after working on the vehicle. :mad::censored:

Quote:

---

Originally Posted by dullbird

we had resistance (could also be explained as a notchy feeling) which came apparent when at around 10 and 1 on the wheel when turning the wheel on our 110 at slow maneuvering speeds only,,,I don't know the exact cause but I do know they changed the entire steering column for it.

---

I have this same problem now. Feels like something catches when turning a corner at slow speed and then bringing the wheel back to center. Better get them to look at it.

Quote:

---

Originally Posted by Larry

Have you had the turbo hose recall done?
I had the same symptoms after the 'fix' was done.
The new bracket was fouling on the bolt of the steering shaft uni joint as the engine moved during higher revs.
Dealer obviously didn't do a test drive after working on the vehicle. :mad::censored:

---

yes this is after the turbo hose recall

Hose bracket seems non existant but this is the problem hose nearly worn through by knuckle bolt

So this is AFTER you've had the latest "new bracket" fitted?
Looking at the 2nd image, which shows the bracket fitted to the alternator, I can't see the part of the fix that is supposed to fit around the hose, attaching to the alternator bracket, pulling it away from the steering shaft?
Pickles.

Yes Pickles bracket broke for some reason ..............bracket and hose replaced willingly by dealer today as far as air box goes will compare 90 and 130 when I have time for damage


Cheers