Thread: Front Runner Side Table Storage

This is what you need (check each of the images): Table Slides Kit - Dolium Pty Ltd

Cheers
KarlB

My table is stored at the rear of the roof rack; is there any reason why the Front Runner table storage hardware won't work for you? It is two "Z" shaped brackets loosely holding the table and a latch bolt - easy enough to kit bash yourself I would imagine.

The reason I can't use those slides is because one side of the table has two large pins sticking out of it.

So, for that side, I need a different solution.

Originally Posted by The Cone of Silence

The reason I can't use those slides is because one side of the table has two large pins sticking out of it.

So, for that side, I need a different solution.

Yes, mine has the pins and mounts to the side of the Defer too - in fact you can see one of the pins in my photo. The slides still work and I have about 80,000km with my table up there to prove it. The brackets are set so that they are wide enough apart that the pin and table combined width just slides in between them and holds the whole lot laterally. The bracket is wide enough that it still supports the table.

The Front Runner table storage works well. The pin with the spring sits just outside the brackets on my setup You fit the latch at the same end of the table as the pin with the spring.