Can't recall for sure which way round they go, but if I had to guess I'd say cut outs forward. in my case on the 130 I had to refit them or the new pads squealed badly.
Steve
Printable View
Can't recall for sure which way round they go, but if I had to guess I'd say cut outs forward. in my case on the 130 I had to refit them or the new pads squealed badly.
Steve
hi steve-thanks for the reply- by cut-outs facing forward do you mean as in pic 2 or 3?
Pic 2 is for RH outer and LH inner padsQuote:
Originally Posted by mattmac
Pic 3 is for LH outer and RH inner.
Steve
Hi Steve- i added pic 2 or 3 to illustrate which way around the metal shim went on the same pad - does the cutout part sit over the exposed section of brake pad or over the part that already has the attached backing plate on it- Pic 2 is over the existing backing plate and pic 3 is over exposed section-hope that makes sense?