Puma electric window always powered on mod

Quote:

---

Originally Posted by Baytown

A few people have asked about the mod to allow Puma electric Windows to be operated with the ignition off.
Make up a 2 cm jumper cable with 10 amp cable.
Connect to the window relay block found in the drivers side fuse location as per the attached photo.
And jobs done. Your windows should now be able to operate irrelevant to the key position.
Any issue with your vehicles electrics is your responsibility, but this is fault free in my experience and with my electrical system.
Best wishes all.
Ken

---

Ken, any solution to enable both windows to go up at the same time? I have pretty big hands and even I cant press them both at the same time with my thumb and little finger stretched out - quite annoying.

I was thinking of buying a spare dash switch and splicing both existing sides to connect together. Not sure if that will work but sounds like it should, or if theres a simpler/better solutions.

That's an interesting question!
Not that I'm aware of sorry mate, and must admit, it's not an issue Ivehad problems with.(Small, Trump like hands!)
Ken

Seriously? Pressing 2 buttons is annoying? Have we as a species really come down to this? [emoji6]

They close so damn fast as is...

Anyhow, linking them will be an easy challenge - you'd need to add a small isolator switch between them to maintain independent control as well and use a wire to patch between the "up" on the drivers switch to the "up" on the passenger switch..

haha yes Tombie.....it's one of those very minor things that just irritates me each time I go to do it. Its not on my priority list but its something I'll get round too at some stage.