Puma Load Area Seat Measurements needed - help!

WallyB: Please PM me and I will answer all of your questions in excruciating detail :)

Hopefully some nice person here can take a tape measure to their truck to verify the measurements. Since mounting the seats involves cutting, I'd like to measure twice, cut once :)

Quote:

---

Originally Posted by frogg

WallyB: Please PM me and I will answer all of your questions in excruciating detail :)

Hopefully some nice person here can take a tape measure to their truck to verify the measurements. Since mounting the seats involves cutting, I'd like to measure twice, cut once :)

---

Now I am intrigued!

Sadly I cant help as I have a LWB. However... If my memory serves me correctly (im at work and the car is at home)...

If you stick you head under the car, in the wheel well, you should see that the captive mounting nuts are installed by default. You should be able to drill a pilot up up from underneath (through the nut). Then enlarge the hole from the top to allow the bolt through.

Quote:

---

Originally Posted by frogg

bump for sizl?

---

Hey sorry frogg. I’ve been battling some defender demons of my own. I’ll have a crack tomorrow.

Quote:

---

Originally Posted by sizl

Hey sorry frogg. I’ve been battling some defender demons of my own. I’ll have a crack tomorrow.

---

Thanks! At least we're all battling our Defender demons together :)

Frogg. In your first pic, Is the purple dotted line just the vertical edge of the rear cross member?

Quote:

---

Originally Posted by sizl

Frogg. In your first pic, Is the purple dotted line just the vertical edge of the rear cross member?

---

Yes, vertical edge of the rear crossmember, exactly [thumbsupbig]

Below is the bracket side measurement line
Attachment 145629

Quote:

---

Originally Posted by Wallyb

Well I am confused .. you dont have one, you cant buy one, ..umm why?

It might help if you put some context around this.

WallyB

---

C= 223mm & B=397mm

I’ll measure A shortly. Was getting attacked by mosquitoes.

Ok the last one (A) is a real pain with rear folding seats. I can’t get a clear line from the seat belt mounting bolt.

There is a small black rectangular plate in the right rear corner on top of the wheel arch. I measured 230mm from the front edge of the plate to the centre of the seat post bolt. Does that help? I’ll try and have another crack tomorrow.

Works for me, Sizl - thanks again and I very much appreciate the measurements! I've also forgotten that it's summer out there and probably quite hot...

It is interesting...another kind fellow from another board has measured ( B ) at 440mm...The (C) measurement, however, is identical to yours.

I'm starting to wonder that maybe there is some variation on the location of the seats between trucks?

Quote:

---

Originally Posted by frogg

Works for me, Sizl - thanks again and I very much appreciate the measurements! I've also forgotten that it's summer out there and probably quite hot...

It is interesting...another kind fellow from another board has measured ( B ) at 440mm...The (C) measurement, however, is identical to yours.

I'm starting to wonder that maybe there is some variation on the location of the seats between trucks?

---

Curious. Measured mine again. Definitely 397 for B. 440 is closer to the next edge on the bracket (435). I checked the other side of the truck and also measures 397