Thanks to all the good advice I have now done the first one and, after a cuppa, will do the second. I have one more question: what are the torque settings for all three nuts?
Printable View
Thanks to all the good advice I have now done the first one and, after a cuppa, will do the second. I have one more question: what are the torque settings for all three nuts?
197nm for the two at the diff end
176 nm for the chassis end
Only torque them with the vehicle on the ground.
It has been the whole time :(
One last question - the torque on the track rod?
http://https://workshop-manuals.com/landrover/defender300tdi/front_suspension/torque_values/
Panhard rod 88nm both ends
Ball joints are 45nm, I think
After spending all day replacing the bushes, which were said by the RWC inspector to be split, the only thing wrong was that one of them had a small piece missing! I will be showing him when I go back...