Have you adjusted the pre-load on the clutch pedal? Perhaps you don't have any pre-load and the master cylinder is not letting the clutch fully engage.
Hi, I put a new master and slave in 300ks ago and the clutch has just started to slip.
What should I check/do next?
The clutch plate has about 60000 ks on it and I am reasonably kind to the clutch.
Have you adjusted the pre-load on the clutch pedal? Perhaps you don't have any pre-load and the master cylinder is not letting the clutch fully engage.
check the pedal clearance and the fast fill valve
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Many thanks Dave. I was hoping you would spot my post.
I have suffered from a slipping clutch in the past. It was apparent when the vehicle was only hot.
Master cylinder push road required adjusting. I made the mistake of taking all the free play out of it.
Once adjusted, it has been mint ever since.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks