Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: TDV6 Auto Defender conversion

  1. #21
    Join Date
    Nov 2014
    Location
    wauchope
    Posts
    85
    Total Downloaded
    0

    Tdv8

    We are going to do a tdv8 soon as we have a 110 chassis sitting here just begging for one,we will be mating it to the same six speed auto that’s used in our tdv6 conversion.It is going to be a fair bit Moore expensive than the v6 but at least it will be available.I can’t give a time as we are so busy putting tdv6 kits together to send over seas plus other rebuilds in the shop,I still believe the v6 is the best value for money as far as any petrol or diesel conversion goes.

  2. #22
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    What model Zf manual is it you use that adapts to the lt230?

  3. #23
    Join Date
    Nov 2014
    Location
    wauchope
    Posts
    85
    Total Downloaded
    0

    Manual

    Quote Originally Posted by Vern View Post
    What model Zf manual is it you use that adapts to the lt230?
    Why don’t you give me a call Vern 0400328407

  4. #24
    Join Date
    Nov 2014
    Location
    wauchope
    Posts
    85
    Total Downloaded
    0

    tdv6

    i have now completed just over 5000km and couldnt be happier,a few small issues but nothing that would let you down
    its smooth economical 10 to 12 litres per 100 sits on what ever speed you want to do its like driving a disco 4 with attitude

  5. #25
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    As always Glenn, very impressed!
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  6. #26
    Join Date
    Jan 2020
    Location
    McGowanastan
    Posts
    694
    Total Downloaded
    0
    Certainly a very impressive effort and well done to you and your team.

    I must ask - why the TDV6 ? if you log into the D3 /D4 section , they are all time bombs waiting to happen ,and there must be atleast 1 thread on every page on people worried , or concerned , or why they wont purchase this model , all because of the preceived crank / bearing failure of these engines...

    I am not picking a fight here , as i own one of the preceived time bombs , but as an owner of 1 of these engines , for me personally its 1 of the most frustrating parts of being on this forum.

    If i was a puma owner , i would be reading what you have done with joy.

    Bulletman

  7. #27
    Join Date
    Nov 2014
    Location
    wauchope
    Posts
    85
    Total Downloaded
    0

    tdv6

    Quote Originally Posted by Bulletman View Post
    Certainly a very impressive effort and well done to you and your team.

    I must ask - why the TDV6 ? if you log into the D3 /D4 section , they are all time bombs waiting to happen ,and there must be atleast 1 thread on every page on people worried , or concerned , or why they wont purchase this model , all because of the preceived crank / bearing failure of these engines...

    I am not picking a fight here , as i own one of the preceived time bombs , but as an owner of 1 of these engines , for me personally its 1 of the most frustrating parts of being on this forum.

    If i was a puma owner , i would be reading what you have done with joy.

    Bulletman
    I believe the very first tdv6 had bearing issues but after that very reliable if serviced correctly,i know alot of people had trouble normally after some one had done a timing belt change.There are a lot of high millage d3 and r/rover sports out there and ford would not have continued it in the territory if it was that bad.In saying that they did keep using the 3.2 in the rangers which is more of a grenade than a 3.0 litre patrol.We have looked at quite a few different engines to use such as cummins bmw etc,i think we have gone down the right path with this one and we can adapt this set up to the tdv8 if some one would like.We also have the ability to run pretty much any common rail engine that some one would like,the cost just gets prohibitive to adapt boxes and transfer cases.

  8. #28
    Join Date
    Sep 2010
    Location
    Meadow Springs WA
    Posts
    111
    Total Downloaded
    0
    I have always been of the opinion that in the 90, engine options should have been TDCi 2.4/2.2, TD/SD V6. In the 110 the options were TDCi 2.4/2.2, TD/SD V6, TD/SD V8. And in the 130 the options were TD/SD V6, TD/SD V8. All with either a Manual or Auto gearbox option. Yes its a lot of options and that maybe why it never happened but I do tend to feel that this would have help sales a bit more than the lack luster history of sales that showed at the end of days for our beloved Defenders. And with a small upgrade to comply with all the new safety standards that killed it as well (air bags an crap).

    So as an owner of a 130, you can just imagine how pleased I am that all these options are back on the table....so to speak.

    Well done to grinna1965 and his team.
    Last edited by Gibs; 15th October 2020 at 01:01 PM. Reason: typo

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!