-
Super Pro are good, the factory ones should be fine there, just make sure there isn't too much clearance between the steel crush tube and bolt.
I've shimmed a couple over the years with shim stock wrapped inside the crush tube.
-
Don’t forget to check the bolts on the damper and panhard. Worn or incorrect sized bolts can also cause the wobbles
-
Just replaced my front shocks. Had 15yo Bilstins in, and the RH one was knackered. Put in Koni Raid 90's. Got rid of the steering wander, and death wobbles when I hit bumps during cornering. Could also be the rubber bushes on your shocks???
Jost some more things to check.
Cheers,
Ken
-
If you go poly, Super Pro are great. i.e. the one and only.
DL
