REDARC DUAL VOLTAGE GAUGE

Quote:

---

Originally Posted by Tikka7mm08

Found a bit of discussion on whether or not it the sensor is best before the turbo or after... just not sure how to do it!

---

Grease, a drill, vacuum cleaner, a tap die and some patience.

And it needs to be pre-turbo to be accurate.
https://uploads.tapatalk-cdn.com/202...6c70842d1f.jpg

Quote:

---

Originally Posted by Tombie

Grease, a drill, vacuum cleaner, a tap die and some patience.

And it needs to be pre-turbo to be accurate.
https://uploads.tapatalk-cdn.com/202...6c70842d1f.jpg

---

Able to tap in place and the vacuum ensures no metal swarf goes thru the turbo?

Quote:

---

Originally Posted by Tikka7mm08

Able to tap in place and the vacuum ensures no metal swarf goes thru the turbo?

---

That’s the one.

And the grease - put it on the drill and the tap.

Any swarf that does go in is minimal and just start the vehicle and run gently when home is complete to blow any out.