EGR to be or not to be

Quote:

---

Originally Posted by MLD

i don't remember, it was so long ago. I replaced 2 EGR valves, cracked to poos and removed the whole EGR set up. Blanked the exhaust manifold with a blanking plate and blanked the intake with a plate. Everything in between those 2 locations is in a tub under the house. Tuned out the EGR in the ECU. I wouldn't do it again. Has kock on problems with diagnostics and if you do a SCV or fuel pump relearn, i have to plug in the EGR valve so the ECU doesn't throw a wobbly and reject the relearn.

---

yeh I’m not so sure about blanking it out have read it can give you problems in other ways

Im just going to replace my faulty one and let it do its job

As already mentioned, if you blank it, you need to tune it out.

Blanking cures issues, as in the heat exchange is unlikely to crack internally.
As for causing other issues, that just internet bs.