Try Triggs motors at Toronto, they may have them or be able to get you some appropriately rated wheels.
Printable View
Try Triggs motors at Toronto, they may have them or be able to get you some appropriately rated wheels.
I hope this is not too late, but king wheels do that style. I just purchased 7 for my 99 130 in 16x7 and even managed to get them in black. They are 0 degree offset which retains the standard 3.5 inches inside and do not stick out. They look trick. They are also rated at 1200kg which is 200 kg more than needed for the rear axle max load
Disco75 - do you have a link ? How much did they set you back ? Are they steel ?
Is the offset the same as the standard LR rims - ie doesn;t make steering lock any worse ?
And most importantly do they have a safety bead for running tubeless ?
I bought them from my tyre guy that I have used for ages. Tony Curry and his tyres and more store. I bought them to go tubeless and run Michelin XZL 7.50 x 16 4x4 O/r's. I googled wheel offsets and found a great link through exploreoz to a racing page on wheels with an offset table of rims. The wheels have the same measurements inside as the stock 6.5' rim but have an extra inch dish. They are 0 degree offset which retains the load evenly over both wheel bearings, steel for strength and black with white and red pinstrip. They cost me $120 each and do not effect steering lock or ride. The load rating is 1200kg whch gives you a combined axle capacity of 2400kg. My maximum specks for my gross rear axle load is 2200kg. The best thing was it was all just dumb luck it turned out so well. When the sun comes up and i can work out uploading pictures i'll post some.
google is your friend.... :p
King Wheels Australia
Thanks D75 - looking forward to the pics !
Where are you by the way (by which I mean - in what city is that store you mention?)
Vlad
Brisvegas. The good Bayside 2 bridges south of you(ha ha brissie joke). HAVE PHOTOS BUT COMPUTERS ARE STUPID
try these on for size
http://16032008077http://16032008068Just working out this photo thing sorry
I've just put 16x8 on my 110 bought through Bob Jane, about $160 each