I measured my bump stop distance (on the 130) last night - 150mm :o.Quote:
Originally Posted by Col.Coleman
James.
Printable View
I measured my bump stop distance (on the 130) last night - 150mm :o.Quote:
Originally Posted by Col.Coleman
James.
:eek:Quote:
Originally Posted by rainman
How much droop do you have at that ride height ?
and I hope you've slotted your balls :p
Those fronts must be seriously stiff, my 220lb springs were 17.2" new which gave me a bump stop clearance of 120/117mm drivers/passenger side. (Landy/ARB bull bar, Warn XD9000 winch + TJM sidesteps and bars)Quote:
Originally Posted by rainman
To be honest, I can't remember. I've only just got it going after a full restoration. I swear it wasn't that high when I bought and started stripping it down. I haven't put the XD9000 back on it yet, but I got my wife to hang off the bullbar (yeah, she's a bit heavier than a Warn winch but I won't say by how much :eek:) and it only dropped 10mm. I certainly don't intend to keep it that high. The caster is terrible.Quote:
Originally Posted by rick130
James.
Holy Crap Batman,oops Rainman.Quote:
Originally Posted by rainman
May be interested in them though if you don't want them anymore:twisted:
CC
115mm drivers sideQuote:
Originally Posted by rainman
125mm passenger side
:) I was thinking of suggesting swapping, even if it's just temporarily. Your's might be a tad low for me, but I'm probably carrying less weight generally, so........Quote:
Originally Posted by Col.Coleman
Wow. That's with KRFR-03s and all the accessories?! I'm getting the 110 back from MR this afternoon so I'll measure it.Quote:
Originally Posted by weeds
A couple of pics:
https://www.aulro.com/afvb/images/im...011/12/353.jpg
https://www.aulro.com/afvb/images/im...011/12/354.jpg
The 110 (on the right of the pic) has the King KRFR03 fronts:
https://www.aulro.com/afvb/images/im...012/01/756.jpg
Can do. I don't drive it as much lately, so the castor thing won't bother me. Be interesting to feel the difference.Quote:
Originally Posted by rainman
rear looks high too. What's in there?
I also have some rubber 1 inch inserts around here too I haven't fitted yet.
CC
They are 420mm free length, 21mm wire, 7 coils. I don't know what rate that equates to because I can't for the life of me find the diameter (and I didn't measure it last night). The helper springs are in there too but they're hardly even pre-loaded with no weight on the tray. Without the tray on (about 150kg) they are loose.Quote:
Originally Posted by Col.Coleman
I have another set that are 400mm free length, 21mm wire, and 7 coil so I'm thinking of trying them out without the helpers. I figure that's going to drop it about an inch without any weight, and more loaded because of the lack of helpers. If I'm going to be carrying a lot I can whack the helpers in.
James.
and I bet you feel every mm of that(over the smallest of bumps)Quote:
Originally Posted by rainman