TD5 110 Fuel Pump

Quote:

---

Originally Posted by justinc

Andrew, did you have to swap the fuel senders over aswell? (At least you CAN with these pump units:))
I've thought about doing this due to the $$$ difference which is completely unjustified:mad: but I would be pretty certain the senders would have to be swapped over.
Thanks for the info!
JC

---

Hi Justin, the original gauge plugs in and works correctly as far as I can tell. The Defender has a 130l Brown Davis tank so the upper level was never correct - It takes about 300kms till it starts reading off full and from then it is linear within reason to the bottom. The unit looks the same but the Disco pump unit is stightly longer from memory but this is taken up in the spring mount. We only did this because we has a faulty Defender pump and had a spare used TD5 Disco pump unit at hand. Cheers, Erich

Quote:

---

Originally Posted by Bundalene

Hi Justin, the original gauge plugs in and works correctly as far as I can tell. The Defender has a 130l Brown Davis tank so the upper level was never correct - It takes about 300kms till it starts reading off full and from then it is linear within reason to the bottom. The unit looks the same but the Disco pump unit is stightly longer from memory but this is taken up in the spring mount. We only did this because we has a faulty Defender pump and had a spare used TD5 Disco pump unit at hand. Cheers, Erich

---

Thanks Erich, suprised to hear the guage still works, as the dashes etc as you know are vastly different Def to Disco:o and the cahnces of the senders talking to the gauges are very remote!

Thanks for this info, I'll put it to good use one day for sure!

JC