Or it could be like a manual D2's HDC where the gear is computed from the engine revs and the travel speed.
Printable View
The programmer would code the logic before taking a 2nd sip of coffee. Compare this with the cost of designing the gearbox changes to mount a switch, drilling and tapping the switch hole in each gbox, purchase and fit a switch, wiring loom extras and fitting it - no contest in production costs.
Perhaps fit a switch to the low range switch circuit so that the engine ecu doesn't know its in low range, but as stated above, the throttle could use different mappings and thus this solution be unacceptable.
I have had my 07 for over a year now and have had it up and down in some very serious trails. The anti stall feature is brilliant! It does take a completely different style of driving though. Insted of using the accelorator, let the ECU do that, have one foot on the brake and one on the clutch. If you need to slow down a little bit then just ride the brake but if the obstical is to big to hit at 1000rpm speed then ride the clutch, the anti stall will still kick in and you can go as slow as you like. It does take a little practice as it is very easy to apply too much clutch and find yourself tearing backwards off the obstical usually at a great rate of knots :eek:
Believe me they did do their home work and it is a great feature just practice casue it is way diifferent to any other technique you've used before.:burnrubber:
Cheers,
I"ve also found the anti stall works in reverse as well. When you have it in low reverse when backing a trailer, etc. If your just letting it idle along it keeps reving upand increasing speed. Again just a practice thing i guess.
Regards:
Eck