35" on a 130?

Quote:

---

Originally Posted by DeeJay

I have run 34" on my 2" lifted County, no probs, others on this forum will say the same, however the problem you might encounter is whether the cops will want to see an engineering approval.
My engineer would'nt do it, saying uniform laws are in and 50mm is the max.There is an overall 25mm increase in inside track max in Vic too.
I'd check with the authorities & there seems to be a lot of oversize tyres selling on ebay lately.

---

So that means that if the supposedly uniform new rules (NCOPS ?) are strictly applied and 235/85's are taken as approximately somewhere in the 800-810mm overall diameter range new (approx. 31.5-31.7") the tallest tyre you can legally fit is something like a 255/85 at 846mm/33.3" tall or the 285/75 at around the same height.

Has anyone tested that yet ?

Quote:

---

Originally Posted by rick130

So that means that if the supposedly uniform new rules (NCOPS ?) are strictly applied and 235/85's are taken as approximately somewhere in the 800-810mm overall diameter range new (approx. 31.5-31.7") the tallest tyre you can legally fit is something like a 255/85 at 846mm/33.3" tall or the 285/75 at around the same height.

Has anyone tested that yet ?

---

Having just had my Project Landie engineered, & I tried to get approval for my 34" swampers from the VicRoads approved engineer - I pretty much got stonewalled from him- he said no exceptions anymore.:(

34's should just make it in on a fender/county... i thought the new rules were 50mm extra (but can't find it on the site)

Back on 26 Jun 07 HAK introduced this topic in the Technical Tips forum. There was good info and chat.

aew849
04 130 HCPU with spanking BFG MT's 255/85....cured the 5% speedo over read quite nicely!

Quote:

---

Originally Posted by Outlaw

yep fit well with a 2" lift ;)
http://www.aulro.com/afvb/attachment...t-img_3476.jpg

---

GOD DAM Nice !!!!!! is that located on the gold coast ?

Outlaw are you located on the gold coast and what did that cost you to put the wheels and tyers on.
If you are in the area what is the next meet for the gold coast club and are there similar rigs in the club
cheers

Heya Blue Juice... yep i'm on the GC and next meeting is this thursday at Hinterland Hotel (first thursday monthly).

Are a few decent modified landies depending on what you're into... those tyres in the above pic are actually PSimpson7's... was testing them before purchasing... as of 8.30am yesterday morning this is mine :D:D:D Will need a touch cuttung and moving out the flares though... 35x12.5x15 claws on -22 offset 15x8 dynamics

https://www.aulro.com/afvb/

Quote:

---

Originally Posted by Outlaw

Heya Blue Juice... yep i'm on the GC and next meeting is this thursday at Hinterland Hotel (first thursday monthly).

Are a few decent modified landies depending on what you're into... those tyres in the above pic are actually PSimpson7's... was testing them before purchasing... as of 8.30am yesterday morning this is mine :D:D:D Will need a touch cuttung and moving out the flares though... 35x12.5x15 claws on -22 offset 15x8 dynamics

http://www.aulro.com/afvb/attachment...ce-again-0.jpg

---

Would be interested in seeing what your gonna do about moving the flares out... I've got similar offset rims and they stick out about 2" further than the original flares... I just havent been able to think of a way to extend them out..

Do you know how your gonna do it yet...? Would love some tips:)

PM sent Mikey

Quote:

---

Originally Posted by aew849

Back on 26 Jun 07 HAK introduced this topic in the Technical Tips forum. There was good info and chat.

aew849
04 130 HCPU with spanking BFG MT's 255/85....cured the 5% speedo over read quite nicely!

---

Nice pic of the sign and 130 ! Can you place some of the tyers and 130 from side on .
Cheers Blue