Thread: Dual Spare Wheel Carrier for 110

ARB I belive make one for the landcruiser


if you do some searching on the forum you should find the drawings for a defender dual spare carrier. You could take that to your local engineering fabricator and they should be able tp knock one up for you.

Kaymar

Originally Posted by hook

Kaymar

Unfortunately, they only make a single wheel carrier for the 110 / Defender, see at the bottom of this page:

KAYMAR Defender

Jon

http://www.aulro.com/afvb/90-110-130...ier-xavie.html


$2600


And this one:

http://www.aulro.com/afvb/projects-t...l-carrier.html

All the swing away parts can be bought, the Defender has the huge advantage of having the rear crossmember RIGHT THERE in your face

Easy to make your own, and it'll be WAYYYY cheaper.


JC

I see cewilson found the drawings I was refering to earlier.

rijidij has also put up some pics of a project he put together for a single wheel carrier. He found a good source for the bearing/hub to get the pivot. With a bit of imagination and a tape measure I am sure that you could come up with a dual wheel carrier.


But as others have said, Why? For the times you need a sixth wheel you could find a storgae location for the trip. I used roof bars and put the spare up there.

Originally Posted by slug_burner

But as others have said, Why? For the times you need a sixth wheel you could find a storgae location for the trip. I used roof bars and put the spare up there.

I did 2 this trip, i know of 1 RR that did 3, and 3 otheres who were doing the 550klm trip home with nothing with air but the one in each cnr.

and its horible driving with no swaybar and 4 wheels on the roof. even 2 is not so nice.